|ISO-730||Isolated Digital I/O Board|
The ISO-730 has 32 optically isolated digital I/O and 32 TTL logic I/O channel. Each of the 16 isolated digital input channel accept voltage from 5V to 24Vdc and has a resistance of 1.2K onm. Every eight input channels use one external common ground. For example, channel 0-7 use EI.COM1 and channel 8-15 use EI-COM2. Each of the 16 isolated digital output channels equipped a darlington transistor. Every eight output channels use the common emitters. The power supplyof the output port should use the external power. The channels 0-7 use EO-COM1 and channel 8-15 use EO-COM2. This interface board is easy installed in any PC/AT/XT. The board interface to field logic signeds, eliminating ground loop problems and isolating the host computer from damaging voltages.
The ISO-730 has one 37-pin D-sub connector and four 20-pin header. It is fully compatible to PCL-730.
ISO-730 : Isolated 32-chanel digital I/O Board
DN-37 : 37-Pin D-sub connector Screw terminal Board
DB-37 : (Direct connect )
37-pin D-sub connector Screw terminal Board
CA-4002 : 37-pin Male D-sub connector with plastic cover
DB-16P : isolated Digital input Daughter Board
DB-16R : isolated Relay output Daughter board
Isolated Digital I/O