PIO-D64 64-bit OPTO-22 Digital I/O BOArd

The PIO-D64 provides 32 digital input channels, 32 output channels and 6 counter/timer channels. The PIO-D64 consists of two 16-bit input ports and two 16-bit output ports. The user can use the DB-16P to connect the input ports (CN2,CN4) for isolation purpose, or use DB-16R to interface to the output ports  (CN1, CN3) for relay control. There are four-clock source, 2M , 1M , 500K and 250K on the board, The user can use the clock source from the soldering pad. On board timer/ counter provide 3 channels for frequency measurement, event counting and pulse generation. The second 8254 provides 3 channels for interrupt function. It can be installed in a 5V PCI bus and can support truly "Plug & Play" Specifications
  • All inputs are TTL compatible
  • Logic high voltage: 2.4V ( Min. )
  • Logic low voltage: 0.8V ( Max. )
  • All outputs are TTL compatible
  • Sink current: 24 mA ( Max. )
  • Source current: 15 mA ( Max. )
  • Power consumption: +5V @ 580mA 

Environmental : 

  • Operating Temp. : 0 to 60?C
  • Storage Temp. : -20?C to 80 ?C
  • Humidity: 0 to 90 % non-condensing
  • Dimensions: 156mm x 110mm
Features
  • Double side SMT, short card
  • Provides four 20-pin flat cable connector to DB-16P , DB-16R daughter board
  •  32-bit digital input Lines and 32-bit digital output lines
  • One 16-bit counter and One 32-bit counter with 4 Mhz time base
  • 3 independent programmable 16-bit down counter
  • Programmable interrupt handling
  • Five 20-pin headers
  • Output status readback
  • Interrupt trigger by :Even / Timer trigger

Software :

  • NAPWIN : Software Toolkit for Windows 95/98
  • NAPWNT: Software Toolkit for Windows NT 4.0
  • NAPVIEW: Software Toolkit for LabVIEW

  • NAPX:ActiveX Control (OCX) for Windows 95/98/NT

 

Ordering  Information
  • PIO-D64 : PCI-Bus 64-bit DIO board 
  • includes software : NAPPCI/DOS
Options
Daughter Board
  • DB-16P : 16-channel isolated D/I board
  • DB-16R: 16-channel relay board
  • DB-24PR: 24 channel power relay board
  • DB-24POR: 24 channel Photo Mos Relay output board
  • DB-24SSR: 24 channel Solid State Relay output board
  • DB-24C: 24 channel open-collector output board
  • DN-20: I/O connector block with DIN-Rail mount
  • DN-20/N: DN-20 without DIN-Rail mount
  • ADP-20/PCI: 20-pin extender